repeat">
A. Kumar & Company
A. Kumar & Company
Kalbadevi, Mumbai, Maharashtra
GST No. 27ADUPS8278F1ZL
Call 08048763395 87% Response Rate
Send E-mail

HANNA INSTRUMNETS PRODUCTS

Hanna instruments®, a world leading manufacturer of analytical instrumentation, has a network of 60 subsidiaries in 43 countries worldwide and offers over 3000 products to its customers. Hanna is headquartered in Woonsocket, RI.

• 1980 - World's first single-probe portable conductivity meter
• 1982 - World's first pH controlled chemical dosing pump
• 1984 - World's first microprocessor-based hand held pH meter
• 1985 - World's first pH electrode with built in temperature sensor
• 1986 - World's first electronic pocket-sized pH tester
• 1988 - World's first pre-amplified pH electrode
• 1990 - World's first waterproof portable pH meter
• 1991 - World's first replaceable electrode pH pocket tester
• 1992 - World's first portable pH meter with plain-paper printing
• 1995 - World's first pocket thermometer with cal-check feature
• 1997 - World's first pH tester with double junction electrode
• 1999 - World's first pH/temperature tester with dual level LCD
• 2000 - World's first multi-parameter (pH/conductivity/temperature) pocket tester
• 2002 - World's first colorimeter with cal-check feature
• 2003 - World's first pH meter with calibration check feature
• 2004 - World's first process pH meter with integrated cellular communication
• 2005 - World's first single parameter line of auto titrators for wine testing
• 2006 - World's first pre-amplified probe multi parameter portable meter

Request CallBack
Hanna Handheld Colorimeters
Get Best Quote

Hanna Handheld Colorimeters

Approx. Price: Rs 3,800 / PieceGet Latest Price
The HANNA Checker®HC bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits are not very accurate and only give 5 to 10 points resolution while professional instrumentation can cost hundreds of dollars and can be time consuming to calibrate and maintain. The Checker®HC is both accurate and affordable. The contoured style of the Checker®HC fits in your palm and pocket perfectly and the large LCD is easy to read. The auto shut-off feature assures the battery life will not be drained if you forget to turn it off.

Features:
  • Easier to use and more accurate than chemical test kits
  • High accuracy
  • Large, easy to read digits
  • Auto shut off
  • Dedicated to a single parameter
  • Designed to work with HANNA’s reagents
  • Small size, big convenience
  • Use for quick and accurate on the spot analysis
  • Single button operation: zero and measure
  • Operated by a single AAA battery

Specifications:
  • Weighing a mere 64 g (2.25 oz.)
  • Test aperture: 8 mm
  • Power: Electronic
  • Lighting system: 8 / d (8°Falloff / diffuse reflection)
  • Colour: Green

Additional Information:
  • Minimum Order Quantity: 1 Piece
Yes! I am interested
Request CallBack
Chlorine, Free Ultra High Range Portable Photometer
Get Best Quote

Chlorine, Free Ultra High Range Portable Photometer

Approx. Price: Rs 14,750 / EachGet Latest Price
HI 96771 has been developed to check chlorine dosing in disinfection processes with ultra high concentrations of chlorine. Thanks to the extended range from 0 to 500 mg/L (ppm), it is ideal for the food industry, such as in fruit and vegetable washing.
The HI 96771 meter measures the free chlorine (Cl2) content in water samples and chlorine ultra high range. The methods are an adaptation of Standard Methods for the Examination of Water and Waste water, 20th edition, 4500-Cl.

Specifications:
  • Focus: 25.00 mm
  • Work Distance (mm): 58.84,7.81
  • Measurement Range X-Y: 50X13 mm

Yes! I am interested
Request CallBack
pHep pH Tester
Get Best Quote

pHep pH Tester

Approx. Price: Rs 3,000 / onwardsGet Latest Price
The pHep revolutionized the pH industry by providing non-technical personnel with a simple, inexpensive solution to accurate pH measurement. HI 98107 is used by millions of people
around the world to monitor pH in laboratories and industrial applications as well as in agriculture, fish farming, food manufacturing and quality control, swimming pools and the printing industry. With a renewable cloth junction, the pHep® has an extended life over typical pH testers. A normal junction clogs with use over time and a typical tester would normally have to be thrown away once the junction is too contaminated. HI 98107’s junction is 2 cm long and when dirty, can be pulled out to expose a fresh section to effectively renew the pHep’s life. Calibration is performed manually at 1 or 2 points with a trimmer located on the side of the tester. With a battery life of 700 hours of continuous use, the pHep® will provide years of testing before the batteries need to be replaced.

Features of pHep pH Tester:
  • Renewable junction
  • Simple to use
  • Economical

Specifications:
  • Easy 1 or 2 point manual calibration
  • 700 hour battery life
  • Colour: Orange

Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
  • Pocket EC And TDS Testers
  • Pocket EC And TDS Testers
  • Pocket EC And TDS Testers
Pocket EC And TDS Testers
Get Best Quote

Pocket EC And TDS Testers

Approx. Price: Rs 3,300 / onwardsGet Latest Price
DiST’s are rugged and reliable pocket-sized testers that offer quick and accurate readings of conductivity or TDS. The DiST® family of testers is widely used for monitoring EC/TDS in drinking water, water conditioning, reverse osmosis, cooling towers, wastewater, laboratories, agriculture, aquaculture and aquariums, hydroponics and the printing industry. These testers feature an amperometric graphite electrode that provides better repeatability in measurements since they do not oxidize. An amperometric measurement of EC/TDS is based on Ohm’s Law, I = V/R where R depends on the distance between two pins and their surface. Oxidation changes both the distance and surface which will affect accuracy. The DiST’s non-oxidizing graphite pins are able to provide an optimal surface for accurate, dependable results. When calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester.

Features of EC And TDS Testers:
  • Graphite electrodes
  • ATC
  • Simple one point calibration
  • Easy to use
  • Economical

Specifications:
  • Accuracy: +/- 2%
  • Battery: 2x1.5 V(Button Cell)
  • Size: 142x25x14 mm
  • Weight: 40 g

Yes! I am interested
Request CallBack
EC/TDS/ Temperature Testers
Get Best Quote

EC/TDS/ Temperature Testers

Approx. Price: Rs 5,500 / EachGet Latest Price
When the original DiST® (Dissolved Solids Tester) was first introduced, conductivity and total dissolved solids measurements became easy and affordable. The DiST's ease of use, in combination with its affordability made it the standard in EC and TDS measurement. HANNA continues the standard in EC and TDS testing with the DiST® 5 and DiST® 6.

These testers include features such as:
  • A replaceable graphite electrode, adjustable TDS ratio, °C or °F measurement, Automatic Temperature Compensation (ATC) with adjustable, battery level indicator, stability indicator, automatic shut-off and automatic calibration.
  • The graphite conductivity electrode provides greater accuracy because it resists contamination by salt deposits in the
  • sample. All of these features are packed in a floating, waterproof casing. These 3-in-1 testers are unmatched in EC/TDS/ temperature measurements.

Some other features:
  • Waterproof and it floats
  • High accuracy
  • Automatic calibration and temperature compensation
  • HOLD function
  • BEPS (Battery Error Prevention System)

Specifications:
  • Measuring range: -50ºC-70ºC
  • Resolution: 0.1ºC
  • Work environment: 0ºC to 50ºC
  • Storage Environment: -10ºC to 60ºC

Yes! I am interested
Request CallBack
Dissolved Oxygen Meter
Get Best Quote

Dissolved Oxygen Meter

Approx. Price: Rs 29,000 / UnitGet Latest Price
This instrument also allows altitude compensation up to 4000 m and the ppm and % saturation are both compensated for changes in solubility of oxygen in water and for permeability of the membrane as well as the temperature effect. The included polarographic probe features built-in temperature compensation and removable protective membrane cover.

Specifications:
  • Size: 6 Inches
  • Color: Blue and White
  • Weight: 90 g 
  • DO range up to 300%, temperature compensated
  • Altitude compensation up to 4000 m
  • Salinity compensation up to 80 g/L

Yes! I am interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
COD Analyzer And Multiparameter Bench Photometer
Get Best Quote

COD Analyzer And Multiparameter Bench Photometer

Approx. Price: Rs 77,000 / PieceGet Latest Price
HI 83099 is one of the most versatile photometers on the market. In addition to COD, this meter measures up to 47 of the most important water quality parameters using liquid or powder reagents. The amount of reagent is precisely dosed to ensure maximum reproducibility.

Features:
  • Easy COD measurement
  • Outstanding measurement quality
  • Save space in your laboratory
  • PC compatible
  • Capable of measuring important 47 methods parameters in water

 

Specifications:

  • Sensitivity: 0.1 ppm
  • Measurement Range: 0-100 ppm
  • Linearity: 0.195 ppm

 


Yes! I am interested
Request CallBack
Dissolved Oxygen Portable Meters
Get Best Quote

Dissolved Oxygen Portable Meters

Approx. Price: Rs 36,200 / PieceGet Latest Price
Dissolved Oxygen Portable Meters is a water-resistant, dissolved oxygen meter that measures up to 300% saturation or 45 ppm (mg/L) with temperature compensation and automatic calibration. It has been developed for DO and temperature measurement in water, wastewater, and applications such as fish farming.

Features:
  • On-screen tutorial messages
  • Two point calibration
  • Auto endpoint
  • DO range up to 300%, temperature compensated
  • Altitude compensation up to 4000 m
  • Salinity compensation up to 80 g/L
  • Automatic calibration in air
  • GLP features
  • Low battery indicator

Specifications:
RangeO20.00 to 45.00 mg/L
Range% Saturation O20.0 to 300.0%
RangeTemperature0.0 to 50.0°C
ResolutionO20.01 mg/L
Resolution% Saturation O20.1%
ResolutionTemperature0.1°C
AccuracyO2±1.5% F.S.
Accuracy% Saturation O2±1.5% F.S.
AccuracyTemperature0.5°C
Calibration
automatic, in air, at 100%
Temperature Compensation
automatic, 0 to 50°C (32 to 122°F)
Altitude Compensation
0 to 1900 m (100 m 326' resolution)
Salinity Compensation
0 to 40 g/L (1g/L resolution)
Probe
HI 76407/4F with 4 m cable
Power Supply
4 x 1.5 AA batteries / approx. 200 hours of continuous use;
auto-off after 4 hours of inactivity; or input for 12 Vdc power adapter
Environment
0 to 50°C (32 to 122°F); RH max 100%
Dimensions
196 x 80 x 60 mm (7.7 x 3.1 x 2.4")
Weight
500 g (1.1 lb.)

    Additional Information:
    • Item Code: HI-9146
    Yes! I am interested
    Request CallBack
    Autoranging EC, TDS, NaCl, Temperature Meter
    Get Best Quote

    Autoranging EC, TDS, NaCl, Temperature Meter

    Approx. Price: Rs 41,000 / EachGet Latest Price
    Features:
    • Autoranging: The EC and TDS scales are autoranging. The meter automatically sets the scale with the highest possible resolution
    • Manual range selection and range lock
    • Four ring potentiometric conductivity probe with internal temperature sensor
    • Automatic (ATC), manual (MTC) or no temperature compensation (NoTC)
    • GLP features
    • Log-on-demand up to 500 records
    • PC compatible via USB

    Specifications:
    • HI 2300 measures EC, TDS, NaCl and temperature. In conductivity and TDS ranges (up to 500 mS/cm and 400 g/L respectively) the instrument automatically chooses the best scale to maintain the highest accuracy
    • EC calibration is a one-point procedure. Selectable calibration points are 0.00 μS, 84.0 μS, 1413 μS, 5.00 mS, 12.88 mS, 80.0 mS, and 111.8 mS selected according with the expected measurement range. NaCl calibration is a one-point procedure at 100.0% NaCl. Use HI 7037L calibration solution as a 100% NaCl standard solution
    • Three options of compensating for temperature are available for this instrument: Automatic (ATC): The EC probe has a built-in temperature sensor which is used to automatically compensate the EC/TDS reading (from -9.9 °C to 120.0 °C), using the selected reference temperature (20 or 25 ºC) and temperature compensation coefficient from (0.0 to 6.0 %)/ ºC

    Yes! I am interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    pH/ORP And ORP Testers
    Get Best Quote

    pH/ORP And ORP Testers

    Approx. Price: Rs 11,000 / onwardsGet Latest Price
    The HI 98120 is a waterproof ORP and temperature meter while HI 98121 measures pH, ORP and temperature. The housing of these testers have been completely sealed against humidity and are designed to float. Electrode replacement with the stainless steel round connector means there are no pins to bend or break during replacement. When the cloth junction becomes clogged and response time is sluggish, simply pull out 3 mm (1/8”) to clear the clogging which will improve response time and stability. The exposed stainless steel temperature sensor on these models facilitates faster and more accurate temperature measurement.

    Specifications:
    • Measuring range 0~1000 mL/g
    • Accuracy ±1% FS
    • Resolution: 1  mL/g
    • Operating Temperature: 0C~50C

    Yes! I am interested
    Request CallBack
    Research Grade Calibration Check PH Meters
    Get Best Quote

    Research Grade Calibration Check PH Meters

    Approx. Price: Rs 50,000 / PieceGet Latest Price
    HI 4521 and HI 4522 are research grade, benchtop instruments that feature 8 measurement ranges: pH, ORP (Oxidation Reduction Potential), ISE (HI 4522 only), conductivity, resistivity, TDS, salinity and temperature. These instruments incorporate dual channels with a separate temperature input and support the external reference electrodes required by half cell pH and ISE sensors. HI 4221 and HI 4222 are research grade pH, ORP and temperature benchtop meters. HI 4222 also incorporates ISE measurements and dual channels.

    Specifications:
    • Auto.Temp.Compensation range: 0~95º C
    • Dimension (mm): 280x210x95
    • Accuracy Ph: ± 0.05pH

    Yes! I am interested
    Request CallBack
    Resolution pH/mV/ISE/C Meter
    Get Best Quote

    Resolution pH/mV/ISE/C Meter

    Approx. Price: Rs 3,000 / PieceGet Latest Price
    The HI 2216 is a pH, ORP, ISE meter with five point pH calibration, 0.001 pH resolution and two point ISE calibration. HI 2216 can perform measurements through the pH channel input using ORP electrodes in the mV scale and ISE electrodes in the ppm scale. A relative mV feature is also provided. This instrument provides GLP capabilities that allows the storage and retrieval of all data regarding pH, ORP, and ISE calibration.

    Specifications:
    • Size: 305 mm(Width)x220 mm(Height)x405 mm(Depth)
    • Voltage: 198V AC - 240V AC
    • Frequency: 50 Hz Powe
    • Accuracy: 0.02%

    Yes! I am interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    Graphic Display EC/Resistivity/ TDS/NaCl Meter
    Get Best Quote

    Graphic Display EC/Resistivity/ TDS/NaCl Meter

    Approx. Price: Rs 27,500 / PieceGet Latest Price
    Specifications:
    • Rated Voltage(V): 230
    • Frequency: 50/60 Hz
    • Current(a): 5(60)
    • Accuracy: 1.0

    Yes! I am interested
    Request CallBack
    Two Channel Benchtop Meter
    Get Best Quote

    Two Channel Benchtop Meter

    Approx. Price: Rs 3,600 / PieceGet Latest Price
    This instrument can measure using ORP electrodes (pH channel input), thanks to its capability to measure mV with a resolution up to 0.1 mV and ISE electrodes on ppm scale (pH channel input). The electrode type and unit selection capability and the ISE calibration in up to five calibration standard solutions make this instrument very useful for a large range of concentration solution measurements. HANNA’s exclusive Calibration Check™ diagnostics system ensures accurate pH readings every time by alerting users of potential problems during the calibration process. The pH channel offers up to five point pH calibration with seven standard buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45) and up to two custom buffers. Messages on the graphic LCD offer directions for easy and accurate calibration for both channels as well as diagnostics to alert the user when calibration or measurement issues are detected.

    Specifications:
    • Colour: White
    • Measuring range: 0.00~14.00 pH (±0.05 pH)
    • mV: 0~±1999 mV (±10 mV)

    Yes! I am interested
    Request CallBack
    Research Grade ISE Meters
    Get Best Quote

    Research Grade ISE Meters

    Approx. Price: Rs 3,600 / PieceGet Latest Price
    HI 4522 is a research grade, benchtop instrument that features 8 measurement ranges: pH, ORP (Oxidation Reduction Potential), ISE, conductivity, resistivity, TDS, salinity and temperature. HI 4222 is a research grade pH, ORP, ISE and temperature benchtop meter. These instruments incorporate dual channels with a separate temperature input and support the external reference electrodes required by half cell pH and ISE sensors. Both models provide direct ISE measurement of incremental methods. The customizable user interface can display two channels at the same time, showing the measurements in various modes: basic measurement with or without GLP information, graph or log history. These instruments offer multi-language support and contextual help is available through a dedicated Help key. Clear tutorial messages and directions are available on-screen to quickly and easily guide users through all measurement and calibration procedures to ensure measurements and procedures are performed properly.

    Specifications:
    • Color: White
    • Working Pressure: 1.6MPa
    • Counter Instructions: Digital

    Yes! I am interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    Hanna Conductivity Meters
    Get Best Quote

    Hanna Conductivity Meters

    Approx. Price: Rs 29,000 / PieceGet Latest Price
    These instruments utilize a four ring potentiometer probe with platinum sensor that offers greater versatility over typical amperometric designs. A potentiometric probe works on the principal of induction which eliminates the effects of polarization (a common problem of amperometric systems). Two outer rings apply an alternating voltage and induce a current loop in the solution while two inner rings measure the voltage drop induced by the current loop (which is dependent on the conductivity of the solution). By utilizing the 4-ring method, it is possible to measure
    very low or high conductivity levels (up to 200 mS/cm) without changing probes.

    Features of Conductivity Meters:
    • Four measurement ranges
    • Manual calibration
    • Automatic Temperature Compensation
    • Analog output (EC 215R)

    Specifications:
    • The temperature coefficient correction is settable between 0 and 2.5%/ºC for EC 215
    • Conductivity: ±0.5% FS
    • Resistivity: ±0.9% FS

    Additional Information:
    • Minimum Order Quantity: 1 Piece
    Yes! I am interested
    Request CallBack
    Free And Total Chlorine Handheld Colorimeters
    Get Best Quote

    Free And Total Chlorine Handheld Colorimeters

    Approx. Price: Rs 3,300 / PieceGet Latest Price
    Specifications:
    • These Checker® HC portable handheld colorimeters Specification a resolution of 0.01 ppm (250 points for free chlorine, 350 for total chlorine)
    • ±0.03 ppm (mg/L) ±3% of reading accuracy. They also use an EPA approved DPD method
    • The HI 711 and HI 701 Checker®HC’s are extremely simple to use. First, zero the instrument with your water sample. Next, add the reagent

    Yes! I am interested
    Request CallBack
    • Dissolved Oxygen And BOD Meter
    • Dissolved Oxygen And BOD Meter
    Dissolved Oxygen And BOD Meter
    Get Best Quote

    Dissolved Oxygen And BOD Meter

    Approx. Price: Rs 42,000 / onwardsGet Latest Price
    Dissolved Oxygen and BOD Meter gives an indication of the biodegradable organic material present in a sample of water. The dissolved oxygen concentration is measured before and after an incubation period of 5 days and the BOD is calculated in mg per liter from the difference. OUR and SOUR are used to determine the oxygen consumption or respiration rate. OUR is measured in mg of oxygen consumed per liter per hour, and SOUR is measured in mg of oxygen consumed per gram of volatile suspended solids per hour.

    Features of Dissolved Oxygen and BOD Meter:
    • Built-in barometer
    • Salinity, pressure and temperature compensation
    • Backlit, graphic LCD display
    • Calibration reminder
    • Log on demand (400 samples)
    • Auto HOLD
    • GLP features
    • PC connectivity via USB

    Specifications:
    • Extended DO range up to 50 ppm and 600% saturation
    • Weight: 1 kg
    • Standard: Temperature 0 to 50 C

    Yes! I am interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    Turbidity And Free/Total Chlorine Portable Meter
    Get Best Quote

    Turbidity And Free/Total Chlorine Portable Meter

    Approx. Price: Rs 65,000 / EachGet Latest Price
    Turbidity and Free/Total Chlorine Portable Meter with CAL CHECK Technology, EPA Compliant. The HI 93414 measures the most important parameters of drinking water: turbidity and free/total chlorine. Designed for water quality measurements, HI 93414 provides reliable and accurate readings on low turbidity and chlorine values. The HI 93414 meets and exceeds the requirements of USEPA and Standard Methods both for turbidity and colorimetric measurements. This instrument incorporates an optical system which guarantees accurate results. The optical system, consisting of a tungsten filament lamp, three detectors (scattered, transmitted for turbidity meter range and one for colorimeter range), and a narrow band interference filter at 525 nm assures long term stability and minimizes stray light and color interferences. It also compensates for variations in intensity of the lamp, making no need for frequent calibration. The 25 mm round cuvettes made from special optical glass guarantee repeatability and consistency of measurements.

    Specifications:
    • Precision: ≤3%±0.01
    • Testing time: 1 min
    • Weight: 0.15 kg

    Yes! I am interested
    Request CallBack
    Turbidity Benchtop Meter, ISO
    Get Best Quote

    Turbidity Benchtop Meter, ISO

    Approx. Price: Rs 99,000 / PieceGet Latest Price
    HI 88713 is based on an optical system which guarantees accurate results, long term stability and minimizes stray light and color interferences. It also compensates for variations in intensity of the LED, limiting the need for frequent calibration. Depending on the measured sample and needed accuracy, normal, continuous or signal averaging measurement can be selected. A two, three, four or five-point calibration can be performed using the supplied standards. Calibration points can be modified when user prepared standards are used.

    Specifications:
    • Colour: White
    • pH range: 0.00~14.00
    • mV accuracy: +/-0.2 mV(-199.9~199.9 mV) or +/-2 mV(others)

    Yes! I am interested
    Request CallBack
    EC/TDS/Temperature Meters
    Get Best Quote

    EC/TDS/Temperature Meters

    Approx. Price: Rs 150 / PieceGet Latest Price
    These instruments are ideal in applications such as water conditioning, fish farming, agriculture and water treatment. They easily fit in the palm of your hand and the bottom probe connection ensures the electrode cable doesn’t get in your way. The large, multi-level LCD displays the primary reading, temperature and calibration guides simultaneously.

    Specifications:
    • Power supply: AC 220 V±22 V, 50 Hz±1 Hz
    • Overall dimension: 220 (length) x 190 (width) x 130 (depth) mm
    • Weight: 1.2 kg

    Yes! I am interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    Autoranging EC/TDS/ NaCl/Temperature Meter
    Get Best Quote

    Autoranging EC/TDS/ NaCl/Temperature Meter

    Approx. Price: Rs 35,500 / onwardsGet Latest Price
    HI 2300 measures EC, TDS, NaCl and temperature. In extended conductivity and TDS ranges (up to 500 mS/cm and 400 g/L respectively) the instrument automatically chooses the best scale to maintain the highest accuracy. This instrument utilizes a four ring potentiometer probe with platinum sensors that offers greater versatility over typical amperometric designs. By utilizing the four ring method, it is possible to measure very low or high conductivity levels without changing probes. Calibration is automatic at one point with six memorized buffers, MTC and NoTC. Other features include a read lock function, stability indicator, GLP and PC compatibility via optional HI 92000 software.

    Specifications:
    • The meter has three options for temperature compensation: ATC between 0 to 60.0°C
    • LCD Display: 4000 Counts
    • Range: 10%~90%
    • Accuracy: +/-1.0%

    Yes! I am interested
    Request CallBack
    PH/ORP/ISE Waterproof Portable Meters
    Get Best Quote

    PH/ORP/ISE Waterproof Portable Meters

    Approx. Price: Rs 45,000 / PieceGet Latest Price
    HI 98183, HI 98184 and HI 98185 are waterproof, portable meters designed for demanding applications. HI 98183 measures pH/ORP and temperature while HI 98184 and HI 98185 also include ISE measurement. .

    Specifications:
    • pH accuracy of ± 0.002 and
    • Resolution: Up to ± 0.001 pH
    • Display: Digital

    Yes! I am interested
    Request CallBack
    Graphic Display pH Meters
    Get Best Quote

    Graphic Display pH Meters

    Approx. Price: Rs 32,000 / PieceGet Latest Price
    HI 98184 and HI 98185 are waterproof, portable meters designed for demanding applications. HI 98184 and HI 98185 measure pH/ORP/ISE and temperatuare. HI 98185 supports 15 different ISE sensors by default and can be calibrated in up to five points and 6 standard buffers (choice of units). This unit allows an extensive choice of measurement units (ppm, ppt, g/L, ppb, μg/L, mg/mL, M, mol/L, mmol/L, % w/v, user) and has an expanded measuring range of 1.00 x 10-7 to 9.99 x 10-10. HANNA's Calibration Check™ maintains a history of past calibrations and monitors the pH electrode and buffers during subsequent calibrations for any signs of wide calibration variances due to a dirty or broken electrode or contaminated pH buffers. In measurement mode, the electrode's percent condition is continuously displayed.

    Specifications:
    • Display: LED
    • Off Mode: Automatic
    • Size: 138X138 mm

    Yes! I am interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    PH Benchtop Meters With Three Point Calibration
    Get Best Quote

    PH Benchtop Meters With Three Point Calibration

    Approx. Price: Rs 13,500 / PieceGet Latest Price
    Product Brochure
    Features of pH Benchtop Meters With Three Point Calibration:

    • Up to three point pH calibration with five standard buffers or two custom
    • ORP measurement (HI 2213 only)
    • Relative mV readings (HI 2213 only)
    • GLP features
    • Calibration expiration reminder
    • Automatic Temperature Compensation

    The HI 2212 and HI 2213 are pH and temperature benchtop meters. HI 2213 can also measure oxidation reduction potential
    (ORP) in the mV range. A relative mV feature is also provided.
    Calibration can be performed at up to three-points using five standard and two custom buffers.

    These instruments feature manual or automatic temperature compensation with the HI 7662 temperature probe. GLP (Good Laboratory Practice) feature provides data consistency. A calibration reminder can be set to alert the user, that too much time has elapsed since the last pH calibration and a new one should be performed.

    Specifications:
    • pH Accuracy: +-0.01 pH
    • Mv Range: -1000~1000 mv
    • Calibration Points: 1, 2 or 3 Points
    • Temperature Range: 0~105 c, 32~221 f

    Yes! I am interested
    Request CallBack
    Analog pH Benchtop Meter
    Get Best Quote

    Analog pH Benchtop Meter

    Approx. Price: Rs 24,500 / onwardsGet Latest Price
    The Analog pH Benchtop Meter is designed for durability and simplicity of use. This instrument features a large, easy to read
    LCD and user friendly dials. The pH calibration is manual at one or two points using dials on the front panel making them ideal for applications that require custom calibration points. In many applications, a standard calibration curve such as pH 7 or pH 4 is too far from the value of the sample to achieve the highest accuracy. Manual calibration enables the user to select the instrument’s calibration points closer to the desired range of measurement to achieve maximum accuracy. The pH 209 can also measure ion concentration (ISE) or ORP (oxidation reduction potential) in the extended mV range with optional electrodes. Durability, simplicity and comprehensive operating procedures make this meter one of the most popular student pH meters available today.

    Features:
    • Simple to operate
    • Manual calibration
    • Manual Temperature
    • Compensation (MTC)
    • Economical

    Specifications:
    • Measuring Range: 0-14 pH
    • Temp.Compensation Range: 0-95 c
    • Mv: 1400-1400

    Yes! I am interested
    Request CallBack
    Waterproof Portable PH Meter
    Get Best Quote

    Waterproof Portable PH Meter

    Approx. Price: Rs 30,150 / UnitGet Latest Price
    HI 98172 is a pH/ORP/ISE meter housed in a waterproof casing. Up to five point pH calibration is available with seven memorized pH buffers and five custom pH buffers to provide users with the
    flexibility necessary to adjust the calibration range to obtain the
    most accurate and precise readings. HI 98140 and HI 98150 are portable Calibration Check™ pH meters that utilize HANNA’s SMART electrode technology. The HI 9126 includes HANNA‘s exclusive Calibration Check™ technology.

    Specifications:
    • Measuring range: pH: (0.00~14 00) pH
    • mV: (0 ~ ± 1400) mV
    • Ambient temperature: (5~40) degree Centigrade
    • Relative humidity: No more than 85%

    Yes! I am interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    Resolution And Data Logging PH Benchtop Meters
    Get Best Quote

    Resolution And Data Logging PH Benchtop Meters

    Approx. Price: Rs 28,000 / PieceGet Latest Price
    Specifications:
    • Up to five point pH calibration with seven standard buffers
    • Calibration expiration reminder
    • Manually log up to 100 records
    • Interval log up to 500 records (HI 2215)
    • GLP features
    • PC interface via USB

    Yes! I am interested
    Request CallBack
    Hi 2000 Series PH Benchtop Meters
    Get Best Quote

    Hi 2000 Series PH Benchtop Meters

    Approx. Price: Rs 29,000 / PieceGet Latest Price
    Hi 2000 Series PH Benchtop Meters is a two channel instrument that measures up to 7 parameters. With this single laboratory bench meter you can measure pH, ORP, ISE, conductivity (EC), TDS, NaCl percentage and temperature. The HI 2221 and HI 2223 are pH benchtop meters featuring our exclusive Calibration Check™ diagnostics for both pH electrodes and buffer solutions. These advanced instruments compare the characteristics of the pH electrode from one calibration to the next. In the case of large variances in the electrode condition, these meters alert the user that the electrode needs to be properly cleaned prior to calibration and measuring. Other models such as the HI 2222 pH meter for wine analysis and HI 2216 pH/ORP/ISE meter.

    Specifications:
    • Mv: 0 to ±1999 mv
    • Measuring Range: 0.00~14.00 pH (±0.05pH)
    • Calibration: 2 Keys Calibration

    Yes! I am interested
    Request CallBack
    HI 3000 series PH Benchtop Meters
    Get Best Quote

    HI 3000 series PH Benchtop Meters

    Approx. Price: Rs 3,600 / PieceGet Latest Price
    The HI 3512 is a 2 channel professional benchtop meter with a graphic LCD, designed to provide accurate laboratory results. Channel 1 features pH/ORP/ISE and temperature measurement capability while channel 2 measures EC/TDS/NaCl/Resistivity and temperature. HANNA’s HI 3220, HI 3221 and HI 3222 benchtop instruments feature up to five point pH calibration with a choice of five custom buffers and seven standard buffers.

    Specifications:
    • Measuring Range: 0-14 pH
    • Temp.Compensation Range: 0-95 c
    • Mv: -1400-1400

    Yes! I am interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    Turbidity And Free/Total Chlorine Benchtop Meter
    Get Best Quote

    Turbidity And Free/Total Chlorine Benchtop Meter

    Approx. Price: Rs 99,000 / PieceGet Latest Price
    Turbidity And Free/Total Chlorine Benchtop Meter, EPA Compliant HI 83414 is a highly accurate dual parameter instrument that reflects HANNA’s years of experience. The HI 83414 successfully combines turbidity and colorimetric measurements to test the most important parameters of drinking water: turbidity and free/total chlorine. The meter is especially designed for water quality measurements, providing reliable and accurate readings on low turbidity and chlorine values. The HI 83414 meets and exceeds the requirements of USEPA and Standard Methods both for turbidity and colorimetric measurements.

    Specifications:
    • Display Type: LED
    • Cooling Water Pipe: 1/2"
    • Power: 3 Phase, 380 V, 50 Hz
    • Circulation Water Pipe: 1/2"X4

    Yes! I am interested
    Request CallBack
    Multiparameter Photometer
    Get Best Quote

    Multiparameter Photometer

    Approx. Price: Rs 75,000 / SetGet Latest Price
    With the ever increasing depletion of fish stocks in the open seas, aquaculture has gained prominence and can prove essential to our future dietary needs. Monitoring and controlling parameters such as the oxygen level as well as pH and nitrate content in water is vital in ensuring profitable fish production. Accurate control can prevent disease, increase production and even reduce the premiums on crop insurance. Research personnel, fish farm operators and wildlife specialists now have one compact and easy to use meter to keep a close tab on the most important parameters in aquaculture.

    Specifications:
    • Linear Range: K: 0~30 mg/I
    • Measuring Range: K: 0~10 mmoi/L
    • Environmental Temperature: 10o C-35o C
    • Relative Humidity: <=85/100

    Yes! I am interested
    Request CallBack
    Multiparameter Photometer
    Get Best Quote

    Multiparameter Photometer

    Approx. Price: Rs 48,500 / onwardsGet Latest Price
    Multiparameter Photometer is one of the most versatile photometers on the market. Multiparameter Photometer has a powerful interactive user support that assists the user during the analysis process. A full tutorial is available in the Setup Menu, and the Help Menu provides assistance for every step in the measurement process. This meter can be connected to a PC via a USB cable, where the data can be managed with optional HI 92000 Windows® compatible software.

    Specifications:
    • Lighting Conditions: D/0
    • Measurement Window: 20 mm
    • Accuracy: ±2 nm
    • Wavelength Range: 400 nm~700 nm

    Additional Information:
    • Item Code: HI-83200
    Yes! I am interested
    Save time! Get the Best Deal

    *Your information is safe with us.

    Request CallBack
    Application Designed Portable pH Meters
    Ask For Price

    Application Designed Portable pH Meters

    Product Price : Get Latest Price
    These compact and waterproof instruments have been designed for specific applications. The feature application specific probes, on-screen tutorial messages for calibration and set-up, and BEPS (Battery Error Prevention System) to alert the user in the event that low battery power could adversely affect readings.

    Specifications:
    • pH Range: -2.00~15.00 pH
    • pH Accuracy: +-0.01 pH
    • Mv Accuracy: +-1 mv

    Other Details:
    • HI 991001, HI 991002 and HI 991003 - Industrial
    • HI 99121 - Soil
    • HI 99141 - Boiler and cooling towers
    • HI 99131 - Plating baths
    • HI 99171 - Leather and paper
    • HI 99161 - Food and dairy
    • HI 99163 - Meat
    • HI 99181 - Skin and scalp

    Yes! I am interested
    Request CallBack
    ISE Fluoride Meter
    Get Best Quote

    ISE Fluoride Meter

    Approx. Price: Rs 1,000 / PieceGet Latest Price
    The HI 84184 is a low cost, easy to use, fluoride ISE meter that performs automatic wine analysis by measuring the fluoride content in wine using an ion selective electrode. The method used is double standard addition, a simple and rapid method of analysis. The instrument utilizes a powerful and effective built-in algorithm to analyze the shape of the ISE electrode response and to determine the reaction completion. Results are immediately displayed in F- mg/L (ppm), after which the HI 84184 is ready for another measurement.

    Specifications:
    • mV Range:-1999.9~1999.9 mV
    • mV Accuracy:±0.2 mV
    • Temperature Range:0~105°C, 32~221°F
    • Temperature Accuracy:±0.5°C, ±0.9°F

    Yes! I am interested

    Explore more products

    X