Laboratory Instruments

Lovibond Tintometer. Model F.
The Model F is a visual colorimeter designed to optimise the use of Lovibond® glass filters in order to express colour in terms of Lovibond® Red, Yellow, Blue and Neutral. It is available in slightly varying formats to meet the requirements of different applications and the national and international standardising bodies which specify the instrument in their official methods for colour measurement.

• Beer, Malts and Caramels
 
•  Chemicals
 
•  Edible Oils and Fats
 
•  Food and Beverage
 
•  Household Products
 
•  Petroleum Oils and Waxes

• Heating zone: Single
• Working temperature: ≤1150 C
• Total power: 2.5 KW

• Gross Weight: 32 kg
• Types keys: 16 Soft touch membrane
• Density: Tap Density, Initial Density, Compressibility Index

• Work voltage: 220 V
• Material: Stainless Steel
• Wave degree of temperature: 5°C to 50°C

• Colour: Grey & Black
• Voltage: 250 V
• Diameter inhabit zone: Up to 0.1 mm
• Frequency: 50 Hz

• Temperature range: 10°c to 60°c
• Humidity range: 35% RH to 95% RH
• Accuracy: +- 3 % RH
• Colour: White

• Display: 20 x 4 Line Alphanumeric LCD with Backlit
• Keyboard: 15 Soft Touch Membrane Type Keys
• Accurate & Operating: Highly Accurate and Easy to Operate
• Storage Facility: 200 Samples
• Capacity: 1000 cc

• Material: Stainless Steel duly
• Scale: 0 to 20 Kg per Sq. Inch
• Type: Tablet Hardness Tester
• Each division: 1 Kg

• Temperature: 400°c
• Material: Joint less aluminium
• Wire: Nichrome wire
• Colour: Blue and White

• Display: LED
• Hardness Range: 4-400N
• Hardness Accuracy: >1N
• Diameter and Thickness Range: 1.5 – 35 mm
• Diameter Accuracy: >±0.05 mm
• Measuring Units: Thickness and Diameter in either mm or Inches,N(Newton)
• Measurable Units: KP (kilopond, iKP = 9.81N),Sc(Strong cob, 1KP = 1.43Sc)
• Force Rate: Constant (Linear) Force or Constant (Linear) Speed
• Number of Tests for Statistics: Number of Tests for Statistics
• Stored Methods: Last test result
• Calibration Procedure: Requires 10mm Reference Block and 10kg Reference Weight(Certified)
• Calibration Technique: No Tilt (User Friendly)
• Distance Validation: 10mm Certified Block (For Thickness and Diameter)
• Load Cell Linearity: 3-Point Linear Calibration with Certified Weight (5, 10, 15kg)
• Load Cell Diagnostic Check: Yes (Check the Load Cell Signal Falls Within Range Before Making any Further Calibration)
• Interface Pots: RS-232(Serial Port for Service Use Only) and Parallel Printer, Parallel Printer and 40 Column Thermal / Mini Dot Matrix Printer
• Dimensions: 22.4″ (w) x 14.6″(h) x 14.2″(d) / (57 cm x 37 cm x x36 cm)
• Weight: Without Printer: 15.4 lbs. / (7 kg),With Printer: 17.6lbs./ (8 kg)
• Electrical Power: 115V ± 15V, 50/60 Hz or 230V ± 23V, 50/60 Hz

Specifications:

• Temperature: 5°c
• Out side chamber made: Stainless steel
• accuracy: + 1°c

• Material: Stainless steel
• Voltage: 230 V
• Frequency: 50 Hz
• Working chamber: 40 x 22.5 Cm
• Temperature: 50°c to 200°c

• Fluoro Sensitivity: Full scale deflection obtained with 1 ppm quinine sulphate in 0.1 N sulphuric acid (primary wavelength 360 nm)
• Display: 3 digit bright red seven segment LED display
• Excitation Source: 12V, 50W Tungsten Halogen Lamp
• Sensitivity Range: Adjustable in 4 ranges
• Primary Filters: Corning 5840 and Corning 5113 mounted on holders
• Secondary Filters: Corning 4308, Corning 3486, Corning 3385 mounted on holders
• Detector: Highly sensitive wide range photodiode/cell
• Sample Test Tube: 15 mm (D) x 80 mm (H)
• Minimum Sample: 4 ml
• Power: 230 V ± 10%, 50 Hz. AC